Hard Disk Drive - HP Z800 Workstation Maintenance And Service Manual

Hard disk drive

This workstation accommodates both SAS and SATA hard drives.
Both 3.5 in. standard hard disk drives or 2.5 in. small form factor (SFF) hard disk drives may be installed
in the workstation.
NOTE:
blind-mate carrier.
Hard disk drives can be installed in the hard drive bay and the optical drive bay. Drives should be installed
in the hard drive bay first, then in the optical drive bay. Installation in the optical drive bay requires an
optional adapter kit.
The hard drives blind-mate (direct-connect) to chassis mounted connectors, so manual cable
connections may be avoided.
This section includes these topics:
Removing a hard disk drive from the hard drive bay on page 109
Installing a hard disk drive in the hard drive bay on page 110
Removing a hard disk drive from the slot load optical bay on page 114
Installing a hard disk drive in the slot load optical bay on page 118
Removing a hard disk drive from the optical drive bay on page 122
Installing a hard disk drive in the optical drive bay on page 124
Installing dual SFF hard drives in the optical drive bay on page 126
108 Chapter 5 Replacing components
Downloaded from www.Manualslib.com
A 2.5 in. hard drive must be mounted in a 3.5 in. adapter before it can be installed in the chassis
Topic
manuals search engine
ENWW