HP Z800 Workstation Maintenance And Service Manual page 180

11.
168 Chapter 5 Replacing components
Downloaded from www.Manualslib.com
c. Fasten the rear system fan assembly, with attached liquid cooling radiator, to the chassis as
shown in the following figure (see
Figure 5-116 Installing the LCS radiator/rear system fan assembly
Connect the LCS cable harness connectors.
TIP: Position the cable harness so that it does not interfere with the memory fan assembly.
a. Connect the rear, and then front LCS cable harness connectors
shown in the following figure.
Figure 5-117 Connecting the LCS cable harness
b. Connect the LCS cable harness inline connector
in the previous figure.
manuals search engine
Installing the rear system fan assembly on page
2
to the rear system fan connector as shown
2
134) .
to the system board as
ENWW