7
Configuring RAID devices
This chapter describes how to configure SAS and SATA RAID devices, and includes these topics:
Maximum hard drive configurations on page 223
Configuring SATA RAID devices on page 224
Configuring SAS RAID devices on page 227
For additional information about configuring RAIDs, see http://www.hp.com/support/RAID_FAQs. For
information about preparing the workstation for RAID configuration, see
workstation_manuals.
Maximum hard drive configurations
This section lists the maximum number of hard drives supported on HP workstations for RAID
configurations.
NOTE:
JBODs.
TIP:
discussed the sections below.
Table 7-1
Workstation
*
ENWW
Downloaded from
www.Manualslib.com
Topics
This section applies to internal workstation configurations that do not use add-in cards and
Use the table values to determine workstation-specific maximum number of hard drives as
Maximum hard drives
SATA hard drive
Z800
5
Z600
3
Z400
4
Small form factor hard drive
manuals search engine
SATA SFF
*
SAS hard drive
hard drive
6
5
4
3
4
4
Maximum hard drive configurations 223
http://www.hp.com/support/