Installing The Front Panel I/O Cable Assembly - HP Z800 Workstation Maintenance And Service Manual

Installing the front panel I/O cable assembly

To install he front panel I/O cable assembly:
1.
2.
3.
ENWW
Downloaded from www.Manualslib.com
With power removed and the chassis open, guide the front panel I/O cable assembly cables through
the chassis openings from which they were removed.
Place the front panel I/O cable assembly in the chassis and slide it up into position as shown in the
following figure . Install the screw
Figure 5-18 Installing the front panel I/O cable assembly
Connect the front panel I/O cable assembly cables to the system board as shown in the following
figure.
Figure 5-19 Connecting the front panel I/O cable assembly cables
Table 5-5 Connecting the front panel I/O cable assembly cables
Item Description
1 Front audio
2 Front 1394a
3 Front USB
manuals search engine
.
2
Removing and installing components 91