Cpu; Removing A Cpu - HP Z800 Workstation Maintenance And Service Manual

CPU

This section describes how to remove and install a CPU.

Removing a CPU

1.
2.
3.
4.
5.
6.
7.
8.
ENWW
Downloaded from www.Manualslib.com
Disconnect power from the workstation (see
Remove the side access panel (see
Remove the expansion card support (see
Remove the airflow guide (see
Remove the memory fan assembly (see
Remove the CPU heatsink (see
Raise the CPU socket lever
Figure 5-125 Removing a CPU
CAUTION: The CPU socket contacts and pads are extremely fragile. Do not touch the CPU
socket contacts or the gold pads underneath the CPU. Use extreme care and handle the CPU only
by the edges.
Pull the CPU straight out of the socket
place where it cannot be damaged
manuals search engine
Predisassembly procedures on page
Removing the side access panel on page
Removing the expansion card support on page
Removing the airflow guide on page
Removing the memory fans on page
Removing the CPU heatsink on page
and open the cover as shown in the following figure.
2
, and store the CPU in a static free container in a safe
Removing and installing components 177
76).
78).
80).
79).
139).
173).