HP Z800 Workstation Maintenance And Service Manual page 173

10.
11.
12.
13.
ENWW
Downloaded from www.Manualslib.com
Remove the LCS radiator from the rear system fan assembly.
a. Remove the screws that fasten the radiator to the rear system fan mounting plate as shown
in the following figure.
Figure 5-107 Removing the LCS radiator
b. Separate the radiator from the rear system fan assembly as shown in the previous figure.
Reinstall the CPU heatsinks (see
Reinstall the rear system fan assembly (see
on page 134).
Reinstall all removed components and reconnect any cables that have been disconnected.
manuals search engine
Installing the CPU heatsink on page
Installing the rear system fan assembly
Removing and installing components 161
175).