Where Incoming Documents Are Delivered - Output Tray; Specifying Tray For Lines - Ricoh C23535 Operating Instructions Manual

Table of Contents

❒ You can load a maximum of 100 sheets of standard paper in the bypass tray.

❒ You can use a size of paper not loaded in the paper tray(s) in the bypass tray.

❒ The machine can detect A6L, A5L, A4L, A3L (5

11"×17"L) paper sizes. When you load any other size, specify the paper size.

However, if the specified paper size and size of paper set in the bypass tray

do not match, paper jams may occur, or the image may be shortened.

❒ Documents printed on paper smaller than A4 may be shortened, or split

across sheets.

❒ Paper longer than 600 mm may be creased, not sent, or jam.

❒ Print area depends on optional expansion memory, resolution, and vertical

length of originals.

❒ If you use this function, Image Rotation and 180-degree rotating printing are

not possible.

"Facsimile Features", General Settings Guide

Where Incoming Documents Are Delivered - Output Tray

You can specify the output tray or output position to facilitate separation of re-

ceived documents.

Use this function to specify the output tray for each line port.

You can specify the document feeding tray for each port (telephone, Internet

Fax, IP-Fax). For example, you can specify documents received through the G3-

1 port to be fed to the "Internal Tray 1" and documents received through the G3-

2 port to be fed to the "Internal Tray 2", facilitating separation of files. You can

also set the machine to output Internet Fax documents and ordinary faxes onto

different trays.

❒ The optional extra G3 interface unit is required to use the extra G3 line.

❒ To use this function, specify the port and destination using [Specify Tray for

Lines] in the Facsimile Features menu.

"Facsimile Features", General Settings Guide

Show Quick Links

Table of Contents