Divide - Ricoh C23535 Operating Instructions Manual

Divide

This section explains settings for dividing multiple originals by a specified num-
ber of pages and then sending them.
A
Press [Original Feed Type].
B
Press [Divide].
C
Press [Change], and then use the number keys to enter the number of pages
you want to divide the job into sets of.
D
Press {q}.
E
If necessary, press [Division Check].
When you select [Division Check], if the originals were not scanned in order
due to a paper jam or multi-sheet feed, a screen for stopping or continuing
scanning appears at the end of the scan.
F
Press [OK] twice.
The current settings are displayed.
Note
❒ If the last page of a batch of divided originals is blank, you can skip that
page. To skip scanning, in [Last Page] under [2 Sided Original], select [1 Side].
To scan the last page as a blank page, select [2 Sides]. For details, see "Two-
sided original".
Reference
p.122 "Two-sided original"
Setting of Original Feed Type
6
125