Where Incoming Message Are Delivered-Output Tray; When The Selected Output Tray Becomes Full; When The Finisher Is Installed - Ricoh Aficio 340 System Settings

GETTING STARTED
WHERE INCOMING MESSAGE ARE
DELIVERED—OUTPUT TRAY
1
To change where incoming messages
are delivered, adjust the Output Tray
setting in the System Settings.
When the Selected Output
Tray Becomes Full
If you install the optional Finisher, the
machine automatically detects when
the selected Output Tray becomes
full. When this happens, a warning
will appear on the display and the
message will be received using Sub-
stitute Reception. Messages received
this way will be automatically print-
ed as soon as you empty the Output
Tray.

When the Finisher is Installed

You can use the Finisher for large ca-
pacity paper delivery and sort deliv-
ery.
Limitation
When the optional 3000-sheet Fin-
isher is installed and you set the
Output Tray to Internal Tray, re-
ceived messages longer than 12.9"
(330mm) are delivered to the Fin-
isher Proof Tray. For example, if
the first page sent is 8.5"
A4L and the following pages are
17" L/A3L, the first page
11"
will be delivered to the Internal
Tray and the following pages to
the Finisher Proof Tray.
If you have selected the optional
1000-sheet Finisher as the Output
Tray and a copy document longer
than 13.3" (340mm) is left in the
22
Finisher, incoming messages are
automatically delivered to the In-
ternal Tray.
Note
If you receive messages larger than
12.9" (330mm) on a regular basis,
we recommend that you choose an
Output Tray setting other than In-
ternal Tray.
11" L/