Ricoh C23535 Operating Instructions Manual page 914

Copying
Changing the stamp position
Changes the stamp position.
A
Press [Change] under Stamp Position.
B
Select the desired position, and then press [OK].
2
Specifying the first printing page and start number ("P1,P2...", "-1-,-2-...", "P.1,P.2...",
"1,2...")
Below explains the example when "P1, P2 ..." is selected. The steps are the same
for other cases.
A
Press [Change] under Change Numbering.
B
Press [First Printing Page], enter the original sheet number from which to start
printing, and then press the {q} key.
122