Color Background - Ricoh C23535 Operating Instructions Manual

Note
❒ The width of the color to be deleted can be adjusted in five levels. If the col-
or width is set to [Wider] and red has been specified, colors, which are close
to magenta or orange, will also be deleted. The color width can be adjusted
in User Tools. See "Adjust Color Image", General Settings Guide.
❒ You can cancel the selection by pressing the selected (highlighted) key in
C
step .
❒ When the Full Color Copy is selected, the full color counter will advance
by "1". When the Black/White is selected, the mono-color counter will ad-
vance by "1".

Color Background

Copies by adding a color in the whole page.
Important
❒ Since the Color Background function overprints the entire original, the color
of the image may change.
A
Press [Edit / Color].
B
Make sure that [Color] is selected before pressing [Color Background].
C
Select the background color, and then press [OK] twice.
You can adjust the density of each color in four steps.
To select User Color, press [User Color], and then select the color.
D
Place the originals, and then press the {Start} key.
Note
❒ You can cancel the selection by pressing the selected (highlighted) key in
C
step .
❒ When the Full Color Copy is selected, the full color counter will advance
by "1". When the Black/White is selected, the mono-color counter will ad-
vance by "1".
Color Functions
2
43