Making Copies; Initial (Default) Settings - Toshiba e-STUDIO 2500c Operator's Manual

2 HOW TO MAKE COPIES

Making Copies

Initial (Default) settings

When the power is turned on, when the energy saving mode is cleared, and when the [FUNC-
TION CLEAR] button on the control panel is pressed, various setting items are automatically set.
These items are called the initial (default) settings. Set originals after placing paper or confirming
that there is paper in the drawers. When the [START] button on the control panel is pressed with
any of the settings unchanged, copies are made in the initial (default) settings. You can make
copies as desired by setting various copy modes.
The table below lists the various items of the initial settings at the time of installation of this
equipment.
Reproduction ratio
Copy quantity
Paper selection
Original -> Copy
Density adjustment
Colour mode
Original mode
Finishing mode
Feeding mode when originals are placed on the
Reversing Automatic Document Feeder (optional)
These initial settings can be changed as desired. See the User Functions Guide for details.
76

Making Copies

Item Initial (Default) setting
100%
1
Automatic Paper Selection (APS)
1-Sided -> 1-Sided
Manual copy density adjustment
FULL COLOUR
TEXT/PHOTO
Placing originals on the original glass: Non-sort/
Non-staple mode
Placing originals on the Reversing Automatic Doc-
ument Feeder (optional): Sort mode
Continuous feed mode