Toshiba e-STUDIO 2500c Operator's Manual page 114

3 SETTING OF BASIC COPY MODES
7
Press the [ENTER] button.
Select other copy modes as required.
8
Press the [START] button.
If the finishing mode is "Non-sort / Non-staple", the original will be scanned and copy-
ing will start. If not, proceed to steps 9 and 10.
9
Place the next original, and press the [START] button.
Data scanning of this original starts.
The next original will also be scanned in the same manner when you press the [YES]
button on the touch panel and then press the [START] button on the control panel.
Repeat the above procedure until the scanning of the last page of the original fin-
ishes.
10
When scanning of all pages has finished, press the [FINISHED] but-
ton on the touch panel.
Copying starts.
When placing photo originals in other sizes
1
Press the [CUSTOM] button.
112 Enlargement and Reduction Copying