Toshiba e-STUDIO 2500c Operator's Manual page 192

5 USING THE EDITING FUNCTIONS
8
After the specifying of all insertion pages is finished, press the
[ENTER] button.
9
Press the [BASIC] button to enter the basic menu, and then select a
paper source of the same size and direction as the sheet insertion.
Select other copy modes as required.
10
Press the [START] button.
When the Reversing Automatic Document Feeder (optional) is used, the original is
scanned and copying starts.
When the original is placed on the original glass, perform steps 11 and 12.
11
Place the next original, and press the [START] button.
Data scanning of this original starts.
The next original will also be scanned in the same manner when you press the [YES]
button on the touch panel, and then press the [START] button on the control panel.
Repeat this step until all the originals have finished being scanned.
12
After all the originals have finished being scanned, press the [FIN-
ISHED] button.
Copying starts.
190 SHEET INSERTION