Toshiba e-STUDIO 2500c Operator's Manual page 296

8 JOB STATUS
4
Specify the paper size.
The paper size can be specified only when you print JPEG files. (If you carry on printing
JPEG files, the size specified in this step continues to be used.)
5
Press the [ENTER] button.
6
Press the [PRINT] button.
Printing starts. Paper exits to the receiving tray.
The printing status can be confirmed in the print job list.
Do not disconnect the USB device while "USB DEVICE in use Do not remove USB
DEVICE" is displayed. This could destroy data in the USB device or cause a malfunction
on this equipment.
294 Confirming Print Job Status