Toshiba e-STUDIO 2500c Operator's Manual page 130

3 SETTING OF BASIC COPY MODES
4
Release the paper and press the [Manual-stapling] button.
The stapling position lamp blinks when the stapling is completed. Remove the paper.
Be sure to release the paper before the manual stapling.
Operation can be continued while the manual-stapling lamp lights. If no operation is
performed for approx. 15 min., the manual stapling operation is stopped.
If you want to stop the manual stapling operation during setting, remove paper and
press the [Manual-stapling] button. The shutter in the paper exit area is closed and
the operation of the manual stapling is finished.
Specification
Acceptable paper size
Maximum number of
sheets for stapling
Stapling position
128 Selecting Finishing Modes
LD, LG, LT, LT-R, COMP, 13" LG, 8.5" SQ, 8K, 16K, A3, A4, A4-R, B4
50 sheets (LT, 8.5" SQ, 16K, A4: 64 - 80 g/m
30 sheets (LD, LG, LT-R, COMP, 13" LG, 8K, A3, A4-R, B4, FOLIO: 64 - 80
2
g/m )
30 sheets (LT, 8.5" SQ, 16K, A4: 81 - 105 g/m
15 sheets (LD, LG, LT-R, COMP, 13" LG, 8K, A3, A4-R, B4, FOLIO: 81 - 105
2
g/m )
Front, Rear
2
)
2
)