Toshiba e-STUDIO 2500c Operator's Manual page 139

7
Press the [START] button. When the data of the opened pages have
been scanned, open the next page and set the booklet on the origi-
nal glass again.
Repeat the procedures above until all the desired pages have been scanned. If the last
copy is only a single page, press the [COPY FINAL PAGE] button on the touch panel
before the scanning of this page is started. The scanned pages will be copied.
8
When all the pages have been scanned, press the [FINISHED] but-
ton on the touch panel.
The scanned pages will be copied.
For setting image shift, see P.165 "Creating a bookbinding margin".
Duplex Copying 137