Toshiba e-STUDIO 2500c Operator's Manual page 154

4 IMAGE ADJUSTMENT
7
Press the [ADJUST] button to adjust the colour balance as
required.
Each the colour balance of yellow and magenta on every density area can be
adjusted by your pressing the [DETAIL] button.
For example, when you adjust the high density area of magenta (M) to
magenta in its high density area becomes darker. When you adjust the low density
area of magenta (M) to
When neither of two colours are black, or when the both of two colours are black, this
adjustment is disabled.
When two colours specified are the combination of black and a colour other than
black, colour balance adjustment is enabled only on the colour other than black.
In case the black part of the original is copied in cyan and other parts are copied in black,
for example, only the colour balance of cyan part can be adjusted.
152 Twin Colour (2-Colour) Copy
side, magenta in its low density area becomes lighter.
side,