Installation For Windows - PRESONUS StudioLive 24.4.2 Owner's Manual

6 Connecting to a Computer
6.2

Installation for Windows

6.2 Installation for Windows
62 62
After you insert the Installation CD into your CD-ROM drive, the StudioLive installer
will take you through each step of the installation process. Please read each message
carefully—ensuring especially that you do not connect your StudioLive too soon.
We made the StudioLive installer as simple and easy to follow as possible. Please
read each message carefully to ensure the StudioLive driver is properly installed.
Before beginning the StudioLive installation setup, please close
all applications, including antivirus software, and disconnect the
StudioLive from your computer. After the installation is successfully
completed, don't forget to re enable your antivirus protection!
PreSonus StudioLive
If you see any Windows Security alerts, click "Install
this driver software anyway" (Vista). (There should be
no such alerts with Windows 7.)
Follow the onscreen instructions to complete
the installation. When the installer has finished,
it will prompt you to reboot your computer.
Click "Finish" to automatically restart your PC. Once
your computer has rebooted, connect the StudioLive.
When the Found New Hardware wizard launches,
follow the recommended steps. Your StudioLive is
now synced to your computer and ready to use!
24.4.2
™