PRESONUS StudioLive 24.4.2 Owner's Manual page 37

Owner's Manual
High-Mid EQ
Sets and Displays the Center Frequency of
Frequency
the High-Mid EQ.
Control
This encoder sets, and the meter
displays, the center frequency of
the High Mid band. You can adjust
the Center Frequency from 380 Hz
to 5 kHz.
High-Mid EQ Q
Sets and Displays the Q of the High Mid
Control
Frequency Band.
This encoder sets, and the meter
displays, the Q for the High-Mid
band. The Q is the ratio of the
center frequency to the
bandwidth. When the center
frequency is constant, the
bandwidth is inversely
proportional to the Q, so as you
raise the Q, you narrow the
bandwidth.
High-Mid EQ
Sets and Displays the Gain Attenuation or
Gain Control
Boost at the Center Frequency.
This encoder sets, and the meter
displays, the gain cut or boost at
the center frequency of the
High-Mid band. The level of the
center frequency can be set
between -15 and +15 dB.
High EQ On/
Activates Control for the High EQ for the
Off Button
Selected Input or Output.
This button actives control of the
High band for the selected channel
or bus. The button will illuminate
to indicate control is active.
The High EQ band is available for all input and
output buses.
High EQ
Sets and Displays the Center Frequency of
Frequency
the High EQ.
Control
This encoder sets, and the meter
displays, the center frequency of
the High band. You can adjust the
center frequency from 1.4 to 18
kHz.
Controls 4
The Fat Channel 4.1
31 31 31