Track In - PRESONUS StudioLive 24.4.2 Owner's Manual

Owner's Manual
4.7.3

2 Track In

2 Track In Volume
Control
Tape Input
On/Off Button
FireWire Source
On/Off Button
The 2 Track input allows you to patch in an analog input or a playback stream
from your audio application. This enables you to compare audio sources during
mixdown or patch in intermission music between bands without using any
of your 24 input channels. This is a summing bus, so both the external tape
input and the two-track FireWire return can be engaged at the same time.
Adjusts the Level for the Tape Input.
This knob adjusts the level for both the tape input and the main FireWire return.
Patches the Tape Input to the Main Outputs.
This button patches the Tape input to the main outputs. It will illuminate to indicate
that the Tape input is being sent to the mains. To disable the routing, simply press the
button again.
Patches the Main FireWire Return to the Main Outputs.
This button routes the main left/right FireWire returns (Outputs 25 and 26) to the
main outputs. It will illuminate to indicate that the main FireWire return is being sent
to the main outputs of the StudioLive. To disable the routing, simply press the button
again. For more information on using the main FireWire return, please consult
Sections 6.4.2, 6.4.4, and 6.4.5.
Controls 4
Master Section 4.7
45 45 45