PRESONUS StudioLive 24.4.2 Owner's Manual page 115

Owner's Manual
Software: Universal Control, SL Remote, Capture, and Studio One Artist 7
It is possible to process each StudioLive mixer input channel with the
Fat Channel before the input signal is routed to Capture. To do this,
you will need to engage the Post button in the Dig Out section of the
Fat Channel for each channel in your StudioLive mixer. This routes
the signal post-EQ and post-dynamics processing. The following
diagram illustrates the signal flow in this scenario (below).
Capture 7.4
109 109