Creating Audio Tracks - PRESONUS StudioLive 24.4.2 Owner's Manual

Owner's Manual
7.5.5

Creating Audio Tracks

Software: Universal Control, SL Remote, Capture, and Studio One Artist 7
1. In the upper left corner of the Arrange window, you will notice several
buttons. The middle button is the Add Tracks button. Click this button
to bring up the Add Tracks window.
2. In the Add Tracks window, you can select the number and type of tracks
you'd like to create (Mono Audio, Stereo Audio, Instrument, or
Automation) and can customize the track name and color.
3. Once you have added your tracks, you can assign the input by simply
clicking on the input to which a track is currently assigned. This will
bring up the inputs list. You can also access the audio I/O setup
from here.
If you would like to add a track for each of the available
inputs and have the routing automatically assigned,
simply go to Track | Add Tracks for All Inputs.
To begin recording, create an audio track, assign it to input
1, and connect a microphone to the first channel on the
StudioLive. Select Record Enable on your track in Studio One
Artist. Turn up the Channel 1 fader while speaking/singing
into the microphone. You should see the input meter in Studio
One Artist react to the input. Adjust the gain so the input
level is near its maximum without clipping (distorting).
Connect a set of headphones to the StudioLive headphone
output and select the Main button in the Monitor section on your
StudioLive. You may also wish to connect monitors to the StudioLive's
control-room outputs. You are now ready to record. For complete
instructions, please consult the Studio One Reference Manual,
which is located on your Studio One Artist installation DVD.
Studio One Artist Quick Start 7.5
135 135