Remotely Controlling Studiolive With Vsl - PRESONUS StudioLive 24.4.2 Owner's Manual

7 Software: Universal Control, SL Remote, Capture, and Studio One Artist
7.2 Virtual StudioLive
7.2.8

Remotely Controlling StudioLive with VSL

86 86
4. To lock your StudioLive, press the System button in the Digital Effects |
Master Control section and navigate to Page 5: Lockout. Your StudioLive
cannot be locked unless this page is active. If you have two StudioLive
mixers linked, you only need to lock the Master unit to lock both mixers
in the chain.
At its lowest level of security, Lockout mode allows you to freeze the
current Fat Channel and effects settings. Faders, aux mixing, and
Scene recall can still be enabled. Each of these mix functions can be
added to Lockout mode. To lock your StudioLive, press the Select
buttons that correspond to the 5-digit password you have set. In
this example, the password is 12345, so you would press the Select
buttons for Channels 1, 2, 3, 4, and 5, in that order. The Panel Status
will switch to Locked, indicating that Lockout mode is now active.
To unlock your StudioLive, navigate back to Page 4: Lockout in
the System menu, if this page is not currently active. Press the
same sequence of Select buttons. The Panel Status will change
to Unlocked, and you will be able to resume your mix.
VSL allows you to control almost every parameter in your StudioLive
remotely from your desktop or laptop computer. Your StudioLive will
reflect every change made in VSL, including fader movements. This
means that if you move Channel 12's fader in VSL, you will hear the
level set in VSL in your mix rather than the level represented by the
current physical position of the Channel 12 fader on your StudioLive.
To sync the faders on your StudioLive with the faders in VSL, simply
press the Locate button on your StudioLive. The Fat Channel
meters on your StudioLive will reflect the current position of each
fader in VSL. While in Locate mode, the faders on your StudioLive
will not be controlling the level of each channel, so you will not
hear any level changes while you recall each fader position. Once
you exit Locate mode, your StudioLive faders will reactivate.
PreSonus StudioLive 24.4.2
™