PRESONUS StudioLive 24.4.2 Owner's Manual page 36

4 Controls
4.1 The Fat Channel
Low Shelf EQ
Turns on the Low Shelving EQ for the
Button
Selected Input or Output Bus.
When the Shelf button is not
engaged, the Low band is
parametric. Enabling the Shelf
button turns the Low band into a
low-shelving EQ that alters, by a
fixed amount, a band of low
frequencies at and below a
user-selected shelving frequency.
Power User Tip: A Low Shelving EQ is like a bass-
control knob on a stereo. In this mode, the Center
Frequency control selects the shelving frequency.
Low-Mid EQ
Activates Controls for the Low-Mid EQ for
On/Off Button
the Selected Input or Output Bus.
This button actives the controls for
the equalizer's Low-Mid band for
the selected input or output. The
button will illuminate to indicate
control is active.
The Low-Mid EQ is available for all input and
output buses.
Low-Mid EQ
Sets and Displays the Center Frequency of
Frequency
the Low-Mid EQ.
Control
This encoder sets, and the meter
displays, the center frequency for
the Low-Mid band. You can adjust
the center frequency from 75 Hz to
1.2 kHz.
30 30 30
PreSonus StudioLive
Low-Mid EQ Q
Sets and Displays the Q of the Low Mid
Control
Frequency Band.
This encoder sets, and the meter
displays, the Q for the Low-Mid
band.
The Q is the ratio of the center
frequency to the bandwidth.
When the center frequency
is constant, the bandwidth is
inversely proportional to the Q, so
as you raise the Q, you narrow the
bandwidth.
Low-Mid EQ
Sets and Displays the Gain Attenuation
Gain Control
or Boost of the Center Frequency for the
Low-Mid Band.
This encoder sets, and the meter
displays, the Gain cut or boost at
the center frequency of the
Low-Mid band. The level of the
center frequency can be set
between -15 and +15 dB.
High-Mid EQ
Activates Controls for the High-Mid EQ for
On/Off Button
the Selected Input or Output Bus.
This button actives the control for
the High-Mid band for the selected
input or output. The button will
illuminate to indicate that the
control is active.
The High-Mid EQ is available for all input and
output buses.
24.4.2
™