Traction Manifold Components, 2Wd - Genie S-60 TraX Service Manual

Section 4 • Repair Procedures
MANIFOLDS
7-10

Traction Manifold Components, 2WD

The traction manifold is mounted inside the drive chassis at the non-steer end.
Index
No. Description
1 Relief valve, 280 psi / 19.3 bar ......... TT ......... Charge pressure circuit .................... 30-35 ft-lbs / 41-47 Nm
2 Flow divider/combiner valve ............. WW ....... Controls flow to drive motors
3 Check valve ....................................... SS ......... Drive circuit ....................................... 30-35 ft-lbs / 41-47 Nm
4 Check valve ....................................... XX ......... Drive circuit ....................................... 30-35 ft-lbs / 41-47 Nm
5 Shuttle valve, 3 position 3 way ......... UU ........ Charge pressure circuit that
6 Orifice, 0.070 inch / 1.78 mm ............ VV ......... Drive motor circuit
4 - 58
Schematic
Item Function
in forward and reverse ............... 90-100 ft-lbs / 122-136 Nm
directs hot oil out of low pressure
side of drive pump ............................ 50-55 ft-lbs / 68-75 Nm
VV UU XX
6 5 4
S-60 • S-65 • S-60 TRAX • S-65 TRAX
S-60 HC • S-60X • S-60XC
Torque
SS
3
December 2013
TT
1
WW
2
Part No. 147753