Animas OneTouch Ping Owner's Booklet page 46

CHAPTER 6 - USING BASAL PROGRAM FEATURES
NOTE:
• If you program a segment to start at the same time as an existing segment, the previously entered
segment is deleted.
• If you program a segment to start at a time that precedes an existing segment, the new segment is
automatically inserted in the correct place. You must then scroll to the new segment, highlight the
corresponding U/Hr field and enter or change amount, if desired.
6.
When finished, scroll to "Save/Review" and press
now resumed automatically. The BASAL OPTIONS screen is displayed.
a.
Select "Review" from the BASAL OPTIONS screen to review your entries for accuracy. Your basal
segment settings are shown (5 on first screen, 5 on second screen and 2 on last screen). If you have
more than 5 segments programmed, scroll to "Next" to see second and third screens as desired.
b.
If you've edited an inactive program, select the program from the BASAL MENU. Press
"Go" from the BASAL OPTIONS screen to activate the program you've selected.
When you select "Go", the Home screen is displayed, which shows the current rate of delivery for the
program that is active. (Or you can simply wait for your pump display to time out. When you press any
button, your active basal program rate information is displayed on the Home screen.)
CAUTION: Always review changes to your basal program to be sure they are correct. Incorrect
basal rates can result in under or over delivery of insulin. See Reviewing Basal Programs, page
32 in this chapter.
Reviewing Basal Programs
1.
From the BASAL MENU, scroll to highlight desired
program. Press .
2.
Scroll to "Review" from the BASAL OPTIONS
screen. Press . Your basal segment settings are
shown (5 on first screen, 5 on second screen and 2
on last screen). If you have more than 5 segments
programmed, scroll to "Next" to see second and third
screens as desired.
3.
When finished, "Options" is highlighted. Press
4.
Scroll to "Main Menu" and press
continues.
5.
If reviewing an inactive program and you wish to activate it, select the program you wish to activate
from the BASAL MENU screen. Press
6.
Select "Go" from the BASAL OPTIONS screen to activate the program. The Home screen is displayed
to show the current rate per hour of the program you have activated.
. If you have edited the active program, it is
BASAL OPTIONS
A1-WEEKDAY
Total
Clear
Edit
Review
Go
Main Menu
.
. The MAIN MENU screen is displayed. The active basal program
.
32
. Select
A1-WEEKDAY
Total
13.60U
Start
13.60U
12:00A
4:00A
- - : - - - - . - - -
Options
U/Hr
0.025
0.675
Next