Error Messages - Animas OneTouch Ping Owner's Booklet

CHAPTER 4 - TESTING YOUR BLOOD GLUCOSE
3
Wait for the confirmation window to fill completely
The blood drop will be drawn into the narrow channel and the confirmation
window should fill completely.
When the confirmation window is full, this means you have applied enough blood. Now you can move
the test strip away from the blood drop and wait for your meter remote to count down from 5 to 1.
4
Read your BG test result on your meter remote
Your BG level appears on the display, along with the unit of measure, and the date
and time of the test. BG test results are automatically stored in your meter remote's
memory.
WARNING: If mg/dL does not appear with the BG test result, call Customer Service at
1 877 937-7867. Use of the wrong unit of measure may cause you to misinterpret your BG
level, and may lead to incorrect treatment.
CAUTION: If you test at the low end of the operating range (43°F/6°C) and your BG is high
(over 180 mg/dL), the reading on your meter remote may be lower than your actual BG. In this
situation, repeat the test in a warmer environment with a new test strip as soon as possible.

Error messages

If you get an ERROR message on your screen rather than a BG test result, see Chapter 10 in Section II,
pages 167–170.
Confirmation
Window
134
Full Not Full
(Example)