Chapter 5 - Checking The Status Of Your Onetouch - Animas OneTouch Ping Owner's Booklet

CHAPTER 5 - CHECKING THE STATUS OF YOUR ONETOUCH

PING
You may review the status of various pump functions and features directly on your meter remote
display. You may also verify your meter remote serial number and software version number. Your meter
remote and pump must be paired, and RF activated, in order to access pump status screens on your
meter remote display.
Press to highlight "System Status" on the Main Menu screen and press
Checking Pump Status
With "Pump Status" highlighted, press
information about your insulin delivery.
Six status screens are available. They are labeled 1 through 6 on the top right of the screen. Basal and
bolus data appear in the first five screens. Your pump serial number and pump software version
number appear on the final screen. Press
twice to highlight and then return to the Main Menu screen.
Status Screen 1- Active Basal
The first status screen shows which basal program is currently active, the
24-hour total for the active basal program, units per hour for the current time
segment, and insulin remaining in your pump. The (status screen) number
"1" will be flashing on the top right of the screen. This indicates that you are
in review mode and can scroll up or down to view other status screens.
To continue scrolling through the status screens, press
"1" is highlighted and flashing. This will take you to the next status screen.
To return to the Main Menu screen, press
highlighted. Press again to return to the Main Menu screen.
™ SYSTEM
to access a series of screens with
to scroll from one status screen to the next, and press
so that "Main Menu" is
205
®
.
Main Menu
A1-WEEKDAY
24-Hr Total
Main Menu
Flashing Number
while the number
A1-WEEKDAY
24-Hr Total
Main Menu
Flashing Number
Bolus
FastFacts
Meter Settings
Add Logbook Entry
System Status
System Status
Pump Status
Meter Status
Status 1
Active Basal
13.60 U
0.675 U/Hr
Insulin 100 U
Status 1
Active Basal
13.60 U
0.675 U/Hr
Insulin 100 U
5