Animas OneTouch Ping Owner's Booklet page 196

CHAPTER 2 - ESTABLISHING COMMUNICATION BETWEEN YOUR METER REMOTE AND YOUR PUMP
1
Activate the RF feature on your pump
Select "Setup" from the Main Menu screen on your pump display and press
2
Select "Advanced" on the SETUP screen on your pump display and press
3
With "Next" highlighted on your pump display, continue to press
through the SETUP ADV screens until the SETUP ADV 10 screen is displayed.
4
Press on your pump until the "RF" field is highlighted. Press
pump so that the highlight is flashing.
5
Press or on your pump to change "OFF" to "ON" and then press
1
Activate the pairing feature on your pump
With the "Search" field highlighted, press
2
Press or on your pump to change "– – – –" to "ON" and then press
3
The pairing feature is activated when "[Searching]" appears on the display.
4
Continue with the steps below for activating the pairing feature on your meter
remote. Remember to keep the pump awake (display on) by pressing and
releasing the contrast button on top of the pump.
1
Activate the pairing feature on your meter remote
Select "Meter Settings" from the Main Menu screen on your meter remote
display and press .
2
Highlight "RF" from the Meter Settings screen on your meter remote
display and press .
3
Select "Pairing" from the RF Set-up screen on your meter remote display
and press .
4
Check that your pump is awake (display on) and the SET UP ADV 10 screen
on your pump display has the "RF" and "Search" fields set to "ON", and
"[Searching]" displayed.
to scroll
on your
so that the highlight is flashing.
178
SETUP ADV 10
METER
.
RF
OFF
Search – – – –
.
Channel Auto
Home Next
Pump Display
SETUP ADV 10
METER
RF
Search – – – –
.
Channel Auto
Home Next
Pump Display
SETUP ADV 10
METER
RF
Search
– – – –
.
Channel Auto
Home Next
Pump Display
SETUP ADV 10
METER
RF ON
Search ON
Channel
Auto
[Searching]
Cancel
Home Next
Pump Display
Meter Settings
Basic
Customize
Lock Buttons
RF
Alerts
Meter remote display
RF Set-up
RF on/off
RF Channel
Pairing
RF Test
Meter remote display
ON
ON