Animas OneTouch Ping Owner's Booklet page 32

Glucose management system
Hide thumbs Also See for OneTouch Ping:
Table of Contents

Advertisement

CHAPTER 4 - GETTING YOUR PUMP READY
5.
Use the
/
buttons to select the next field. Repeat the above process. Scroll to highlight
"Main Menu" and press
button when finished. The MAIN MENU screen will be displayed.
NOTE:
• If you select the 12-hour time format, the AM/PM indicators will change as you scroll to set the time.
Be sure the desired AM or PM selection is correctly displayed when setting the time.
• If you select the 24-hour time format, the time will be shown in military time.
Daylight Saving Time (certain states and countries only)
"Spring Forward"
If you advance the hour on your pump clock after 11pm but before midnight, you must also manually
forward the date by one day. If you change your pump clock after midnight, your pump date will have
changed automatically to the appropriate date.
"Fall Back"
It is recommended that you set your clock back before midnight on Saturday or after 1am on Sunday.
This keeps your pump set to the correct date. Your pump will register an additional hour in the Daily
Totals History because the day has essentially been altered to consist of 25 hours. If you change the
clock between midnight and 1am, you must also change the date. This will result in a duplicate date
entry in your history. (This duplicate entry will contain up to one hour's worth of insulin delivered.)
Sounds - Setting/Changing
Note that this menu only adjusts sounds. It does not activate the feature. For example, Audio Bolus
Sound is adjusted in this menu, but to turn the Audio Bolus feature on, go to the Setup Advanced
menu. See Chapter 10 in Section I, pages 49–58.
Your pump comes pre-loaded with a tune for most Alerts, Reminders and Alarms on medium and high
volume settings. This tune plays only for the initial audible notification. If you do not confirm the initial
notification, the next sound will be the factory default. If not confirmed, Warnings and Alarms will
®
automatically progress to high volume and vibrate within one hour. With ezManager
Software, you
can change or add tunes to play as your initial notification for some Alerts, Reminders, Warnings and
Alarms. Refer to your ezManager
®
User Guide included with the software.
The options from the first SETUP SOUND menu are listed below. The first three can be set to one of the
following: Vibrate (Vib), Low volume (L) , Medium volume (M) , High volume (H) or can be shut off (OFF)
completely. For safety reasons, some sounds cannot be turned off.
Normal Bolus Sound
Audio Bolus Sound (OFF is not an option for this sound setting)
Remote Bolus Sound (Vibrate and OFF are the only options for this sound)
Temp Basal Sound
18

Advertisement

Table of Contents
loading

Table of Contents