Animas OneTouch Ping Owner's Booklet page 33

CHAPTER 4 - GETTING YOUR PUMP READY
The Remote Bolus Sound on your pump signals you when you use your meter remote to deliver a bolus
from your pump. This setting applies only when you begin using your meter remote and pump together
as a system (see Section III). Vibrate (Vib) is the default setting and OFF is the only other option for this
sound setting.
The options from the second Setup Sound Menu are listed below. They can be set to one of the
following: Vibrate (Vib), Low volume (L), Medium volume (M) or High volume (H). For safety reasons,
some sounds cannot be turned off.
Alert Sound
Reminder Sound (OFF is not an option for this sound setting)
Warning Sound (OFF is not an option for this sound setting)
Alarm Sound (OFF is not an option for this sound setting)
NOTE: If you download tunes from ezManager
they will not play for any sound set at the Low volume (L) level.
CAUTION: Unless otherwise recommended by your health care professional, vibrate mode
should not be used during sleep. If you are a very sound sleeper, set the alarm volume to high
before going to bed.
1.
From the MAIN MENU, scroll to "Setup". Press the
2.
Scroll to "Sound". Press the
3.
Use the / buttons to scroll to your selection. Press the
4.
The cursor will flash to indicate you can edit the selection. Use
setting. Press the button to confirm.
MAIN MENU
Bolus
Suspnd/Resum
History
Basal
Setup
Prime/Rewind
Status
Home
5.
Repeat for remaining selections.
6.
Scroll to "Next Menu" to access second SETUP SOUND menu or scroll to "Main Menu" when
finished to return to the MAIN MENU.
®
Software to play on your initial audible notification,
button to go to the SETUP SOUND screen.
SETUP
Time/Date
Sound
Advanced
Main Menu
19
button.
button.
/ buttons to change to desired
SETUP SOUND
N-Bolus
H
A-Bolus
L
R-Bolus
Vib
T-Basal OFF
Next Menu
Main Menu
SETUP SOUND
Alert L
Reminder Vib
Warning M
Alarm H
Main Menu