Animas OneTouch Ping Owner's Booklet page 220

CHAPTER 4 - INSULIN DELIVERY FUNCTIONS ON YOUR METER REMOTE
Using the ezCarb and ezBG calculator feature when your devices are not paired
When you use the bolus calculator feature, your meter remote gets important information from your
pump. If your meter remote is not currently paired with your pump, the meter remote cannot get that data.
There may be times when the two devices are not paired but you would still like to use the calculator
feature on your meter remote. An example might be when you want to give yourself a bolus from a pen
or syringe. You will still be able to use the ezCarb or ezBG calculator feature on the ezCarb and ezBG
Bolus screens.
In cases where your devices are not paired and you access the Bolus
Menu on your meter remote, a Notification screen will appear on your
meter remote display. It will remind you that the bolus calculator values
last set and saved on your pump may not be appropriate for the current
time of day.
If the devices are not paired, the Bolus Menu screen will only include the
ezCarb and ezBG options. The steps for calculating a bolus will be the
same as when the devices are paired. The ezCarb and ezBG Bolus screens
will use the bolus calculator settings last set and saved on your pump
prior to the unpairing. You may edit the bolus calculator settings using the
Calculator Set-up feature on your meter remote or directly on the ezCarb
or ezBG screens.
Bolus Total
BG 0.25U
+
IOB – – . – – U
Total
= 1.45U
1.45
U
Done
Main Menu
(Example ezBG screen when
your meter remote and pump
are not paired.)
See Chapter 1 in Section II, pages 105–120 for a complete explanation of settings from Calculator
Set-up and how they are used on the ezCarb and ezBG Bolus screens.
Note that the ezCarb and ezBG Bolus screens will be similar to the display
screens when your meter remote and pump are paired, with a few
exceptions:
1
The IOB amount will appear as "––.––" to indicate that the IOB stored
in your pump is not available for use in the calculation.
2
"Go" is replaced by "Done" to indicate that you are calculating a bolus
but will not be using your meter remote to deliver it from your pump.
202
Notification
Current calculator
settings may not be
appropriate for
time of day.
Use Calculator Set-up
to edit settings.
Confirm
Bolus Menu
ezCarb
ezBG
Main Menu