Operation
4.5
PU operation mode
Power
supply
From where is the frequency command given?
● Operation at the frequency set in the frequency setting mode of the operation panel.
(Refer to section 4.5.1.)
● Operation using the digital dial as the volume. (Refer to section 4.5.2.)
● Change of frequency with ON/OFF switches connected to terminals. (Refer to section 4.5.3.)
● Frequency setting with a voltage output device. (Refer to section 4.5.4.)
● Frequency setting with a current output device. (Refer to section 4.5.5.)
FR-F700 EC
Inverter
Motor
Fig. 4-11:
PU operation mode
PU operation mode
I001069E
4 - 17