Removing The High Voltage Power Supply Pcb; Preparation - Canon Color imageRUNNER LBP5280 Service Manual

3
Disassembly/Assembly > Controller System > Removing the High Voltage Power Supply PCB > Preparation
11) Install the harness [1] to the Harness Guide [A], and connect the 8 connectors [2] of the
PCB.
[2]
x8
[A] [1]
3 Disassembly/Assembly > Controller System > Removing the High Voltage Power Supply PCB > Preparation

Removing the High Voltage Power Supply PCB

■ Preparation

1) Remove the Right Cover.(Refer to page 3-16)
2) Remove the Operation Panel Unit.(Refer to page 3-36)
3) Remove the Rear Upper Cover (Left).(Refer to page 3-14)
4) Remove the USB Cover.(Refer to page 3-18)
5) Remove the Upper Cover.(Refer to page 3-19)
6) Remove the Left Cover.(Refer to page 3-17).
[2]
3-50
3-50