Table of Contents
Advertisement
5
Troubleshooting > Version Upgrade > Updater > Preparation
● Network Settings
Connecting to External Network
The method of connecting to external network is similar to a normal network connection
method. Refer to user manual of the device for details.
NOTE:
•
Before using UGW link or User mode, see the sections below to prepare as required.
"Enabling UGW Link"
NOTE:
"External Network" here means the network connecting the device to CDS via Internet.
Confirming URL Setting of Distribution Server
This section describes how to confirm the URL setting of the distribution server.
One of the MEAP system service, [Register/Update Software(Management Settings)] is
available.
1. You can log in it from a browser on a PC connected in a network.
Type the address [https://machine's IP address:8443/svm/].
5
Troubleshooting > Version Upgrade > Updater > Preparation
2. Type the password [*28*] then log in it.
Caution:
In the case of the following, you cannot log in even if you input a right password.
• The other user is using "Register/Update Software (Management Settings)" .
• The other user is using "Register/Update Software" in normal Remote UI.
• Because you have closed a browser without logging out definitely, you are still
logging in it. Waiting for time-out.
3. After login, select [System Settings] > [Edit].
4. Confirm that "https://device.c-cdsknn.net/cds_soap/updaterif" is typed in [Delivery Server
URL].
If the URL is not entered or wrong URL is entered, enter the right URL in [Delivery Server
URL].
When you set output level of the log, input numerical value (0-4). Setting the bigger
numerical value, you can get more detailed output log.
F-5-32
5-30
F-5-33
F-5-34
5-30
Advertisement
Table of Contents
