Removing The Fixing Film Unit; Preparation - Canon Color imageRUNNER LBP5280 Service Manual

3
Disassembly/Assembly > Fixing System > Removing the Fixing Film Unit > Preparation
CAUTION:
At installation, be sure to locate the harness as shown in the figure below.
3) Remove the Fixing Assembly [1].
• 2 Screws [2]
[1]
x2
[2]
3 Disassembly/Assembly > Fixing System > Removing the Fixing Film Unit > Preparation

Removing the Fixing Film Unit

■ Preparation

1) Remove the Right Cover.(Refer to page 3-16)
2) Remove the Rear Upper Cover (Left).(Refer to page 3-14)
3) Remove the Rear Cover.(Refer to page 3-13)
4) Remove the Rear Lower Cover.(Refer to page 3-15)
5) Remove the Rear Cover Rib Unit.(Refer to page 3-13)
6) Remove the Duplex Reverse Drive Unit.(Refer to page 3-35)
7) Remove the Fixing Assembly.(Refer to page 3-67)
F-3-154
[2]
F-3-155
3-68
3-68