Table of Contents
Advertisement
5
Troubleshooting > Version Upgrade > Updater > System Management Operations
● Displaying Logs
Update Logs
This section describes how to confirm System Option/MEAP Application Installation Logs and
Firmware Update Logs.
1. Select [Settings/Registration] > [License/Other] > [Register/Update Software] > [Display
Logs/Communication Test] from management mode of Remote UI.
Note:
You can also access from [Register/Updater Software (Management Settings)] > [Display
Logs/Communication Test]
2. Press [Update Logs] button.
5
Troubleshooting > Version Upgrade > Updater > System Management Operations
3. Press [Switch] button.
4. System Option/MEAP Application Installation Logs and Firmware Update Logs are shown.
F-5-47
5-36
F-5-48
5-36
Advertisement
Table of Contents
