Installation Method - Canon Color imageRUNNER LBP5280 Service Manual

3
Disassembly/Assembly > Controller System > Removing the Power Supply Unit > Installation Method

■ Installation Method

NOTE:
The figure below shows where the harness of the Power Supply Unit should be
connected.
• [1] Main Controller PCB
• [2] DC Controller PCB
• [3] Driver PCB
• [4] AC PCB
[2]
[1]
1) Install the Switch Cap [2] and the connector [3] to the Power Supply Unit [1].
[2] [1]
3 Disassembly/Assembly > Controller System > Removing the Power Supply Unit > Installation Method
[1]
[4]
[3]
F-3-94
[3]
F-3-95
2) Install the Power Supply Unit [1] to the host machine.
• 2 Hooks [2]
• 1 Cap [3]
• 5 Screws [4]
x5
[1]
3) Install the Harness Guide [1].
• 2 Claws [2]
x2
3-47
[2] [3]
[4]
F-3-96
[2]
[1]
F-3-97
3-47