Table of Contents
Advertisement
5
Troubleshooting > Service Mode > Service Mode List > FUNCTION GR.
■ OPTION GR.
Items
LONG SLEEP TIME To set the time until it is judged as long sleep.
It is judged as long sleep when the time elapsed from
the completion of the last job until the recovery from
sleep mode is larger than the setting value, while it
is judged as short sleep when it is smaller than the
setting value.
Long sleep is not set when the setting value is 0.
When it is judged as long sleep:
Since there is no engine adjustment processing at
recovery from sleep mode, the machine is recovered
without allowing wait time to occur.
When it is judged as short sleep:
Since there is no engine adjustment processing at
recovery from sleep mode, the machine is recovered
without allowing wait time to occur.
B4-L-CNT
To set whether to handle B4 size as large or small.
SCT-ALL-CLR
To set whether clearing of all counts can be executed
from the "Dept ID control setting" screen of RUI.
SCT-IDV-CLR
To set whether clearing of counts can be executed
from the "Dept editing" screen of RUI.
PS-MODE
To set compatibility with EFI at PS 2-sided delivery or
default value changing function of StrokeAdjustment.
COUNTER-SW
To switch of the counter.
LIMIT AUTO
To control whether to execute or restrain calibration
CALIBRATE
when calibration of color displacement correction and
density correction is requested by the engine.
TONEROUT CONT.
To set to enable/disable printing when the toner
PRINT
reaches the end of life.
The following is controlled: Whether to continue color
printing when YMC toner reaches the end of life, and
whether to continue all the printing when Bk toner
reaches the end of life.
5
Troubleshooting > Service Mode > Service Mode List > FUNCTION GR.
Description
Setting Range
0*, 2, 4, 6, 8, 12,
16, 18, 24, 48
ON/OFF*
ON*/OFF
ON*/OFF
0* to 65535
MODEL1*
MODEL2
ON/OFF*
ON*/OFF
■ FUNCTION GR.
Items
ECONF
EXPORT
GENERAL
DEPEND
SECURITY Whether to set items
ALL
IMPORT
To import device setting data in the
following priority order
USB memory > SD card > RAM
USB-H*
To set to enable/disable the USB host function. By
turning ON the host function, USB memory can be
used.
SUBLOG TO USB
Output Sublog to the USB memory.
RESTOR DCON
To restore backup information of the DC Controller
PCB NVRAM stored in the Main Controller PCB
NVRAM to the DC Controller PCB NVRAM.
CLEAR DCON
To initialize the backup area of the DC Controller PCB
NVRAM in the Main Controller PCB.
COLOR MODE SLCT Function to avoid the symptom in which data with
multiple pages, one of which is specified to be printed
in B&W, cannot be printed in color. B&W/color printing
is automatically judged by the device
Description
Setting Range
Whether to set items
Yes/No*
whose device settings do
not depend on the PCB,
but can be performed
commonly within the
same device as the target
Whether to set items
Yes/No*
whose device settings
change depending on the
PCB as the target
Yes/No*
related to security as the
target
Whether to set all items
Yes/No*
exported in GENERAL/
DEPEND/SECURITY as
the target
Yes/No*
ON/OFF*
Yes/No*
Yes/No*
Yes/No*
ON/OFF*
5-57
5-57
Advertisement
Table of Contents
