High-Voltage Pcb; Preparation For Removing The High-Voltage Power Supply Pcb; Removing The High-Voltage Power Supply Pcb; The Former Procedure Of Removing The High-Voltage Power Supply Pcb - Canon LBP5000 Series Service Manual

3.2.16 High-voltage PCB

3.2.16.1 Preparation for Removing the High-Voltage
Power Supply PCB
LBP5100
1) Remove the delivery tray. (page 3-7)Reference [Removing the Delivery
Tray]
2) Detach the rear cover. (page 3-2)Reference [Removing the Rear Cover]
3) Detach the right cover. (page 3-2)Reference [Removing the Right Cover
/ Right Cassette Cover]
4) Detach the upper cover. (page 3-5)Reference [Removing the Upper
Cover]
5) Detach the left cover. (page 3-4)Reference [Removing the Left Cover /
Left Cassette Cover]

3.2.16.2 Removing the High-Voltage Power Supply PCB

LBP5100
1) Remove the plastic sheet [1].
- 1 screw [2]
2) Remove the high-voltage power supply PCB [1].
- 8 connectors [2]
- 3 screws [3]
- 3 claws [4]
F-3-129
F-3-130
F-3-131
0015-7575
When mounting the high-voltage power supply PCB, make sure that you can
see the spring [2] from the eyehole of the contact points of the spring [1].
In case the spring is not visible, mount the high-voltage power supply PCB
again so that you can see the spring from the eyehole.
0015-7576
3.2.16.3 The former procedure of Removing the High-
Voltage Power Supply PCB
LBP5000
F-3-132
F-3-133
F-3-134
[2]
F-3-135
Chapter 3
0011-1003
3-19