Procedure - Canon Color imageRUNNER LBP5280 Service Manual

3
Disassembly/Assembly > Fixing System > Removing the Fixing Film Unit > Procedure

■ Procedure

1) Remove the 2 Pressure Springs [1] on the right and left and the 2 Pressure Plates [2].
• 4 Hooks [3]
• 4 Bosses [4]
• 2 Protrusions [5]
[5] [4] [3]
[2]
[3] [1]
2) Remove the gear [1], Parallel Pin [2], E-Ring [3], cam [4], and bushing [5].
• 1 Claws [6]
[4]
[3]
[1]
[2]
[6]
3 Disassembly/Assembly > Fixing System > Removing the Fixing Film Unit > Procedure
[3] [4]
[5]
[4]
[2]
[1] [3]
F-3-156
[5]
F-3-157
CAUTION:
At installation, be sure to match the direction of the cam [4] with that of the cam [6] on
the other side of the Fixing Assembly.
[4]
3) After sliding the shaft [1] to remove the Parallel Pins [2] and the cam [3], remove the shaft [1]
and the Sensor Flag [4].
[1]
3-69
[6]
F-3-158
[3]
[4] [2]
F-3-159
3-69