Installation Method - Canon Color imageRUNNER LBP5280 Service Manual

3
Disassembly/Assembly > Pickup/Feed/Delivery System > Removing the Pickup Unit > Installation Method

■ Installation Method

CAUTION:
Be sure not to touch the Pickup Roller [1] and the Secondary Transfer Roller [2].
[1]
1) Open the Rear Cover [1], Put the harness [2] through the hole [A] of the Side Plate, and
Install the Pickup Unit [3] to the host machine.
[3] [1]
3 Disassembly/Assembly > Pickup/Feed/Delivery System > Removing the Pickup Unit > Installation Method
2) Place the edge [A] of the guide of the Pickup Unit over the spring [1] of the host machine.
3) Place the Sensor Flag Cover [B] of the Pickup Unit over the plate [C] of the Roller Unit of
the host machine.
[2]
F-3-189
[2]
[A]
F-3-190
[C]
[B] [B]
[1] [A] [1]
3-82
[C]
[A]
F-3-191
3-82