Destination Code List; Initializing Permanent Data - Kyocera Fax System L Service Manual

Maintenance
item No.

Destination code list

U600
(cont.)
Code Destination
000 Japan
009 Australia
080 Hong Kong
084 Indonesia
088 Israel
108 Malaysia
126 New Zealand
136 Peru
137 Philippines
152 Middle East
156 Singapore
U601

Initializing permanent data

Description
Initializes software switches other than that for machine data on the fax control PCB according to the
destination and OEM.
Purpose
To initialize the fax control PCB without changing user registration data and factory settings.
Method
1. Press the start key. The screen for entering the destination code is displayed.
Enter a destination code using the numeric keys (refer to the destination code list on page 1-3-5 for the
destination code).
INI. KEEP DATA
COUNTRY CODE:000
2. Press the start key. The screen for entering the OEM code is displayed.
There is no operation necessary on this screen.
INI. KEEP DATA
OEM CODE:000
3. Press the start key. Data initialization starts. To cancel data initialization, press the stop/clear key.
4. After data initialization, the entered destination and OEM codes are displayed, and the ROM version is
displayed two seconds later.
INI. KEEP DATA
COMPLETED 000 000
INI. KEEP DATA
COMPLETED V1.00
Caution
If initialized with "000" (code for Japan) entered as the destination code, service call code C0820 (fax control
PCB problem) will be detected. Be sure to enter the correct destination code. If C0820 (fax control PCB
problem) is detected, press the COPY key to put the machine in the copy mode and then execute this
maintenance item again to enter the correct destination code and initialize data.
Description
Code Destination
159 South Africa
169 Thailand
181 U.S.A.
242 South America
243 Saudi Arabia
253 CTR21 (European nations)
Italy
Germany
Spain
U.K.
Netherlands
Code Destination
253 Sweden
France
Austria
Switzerland
Belgium
Denmark
Finland
Portugal
Ireland
Norway
254 Taiwan
3JF
1-3-5