Setting The System (Communication 2); Setting The Criteria For Receiving A Tcf Signal 2; Setting The Short Protocol Transmission; Setting The Reception Of A Short Protocol Transmission - Kyocera Fax System L Service Manual

Maintenance
item No.
U660

Setting the system (communication 2)

Description
Makes settings for fax transmission regarding the communication.
Purpose
To reduce transmission errors when a low quality line is used.
Start
1. Press the start key. The screen for selecting an item is displayed.
2. Select the item to be set using the up/down cursor keys.
3. Press the start key.
The screen for the selected item appears.
TCF CHECK 2
SHORT PRTCOL. TX
SHORT PRTCOL. RX
NUMBER of CNG (F/T)
ABBR ECM
1TOUCH ECM

Setting the criteria for receiving a TCF signal 2

Sets the signal checking time as a criterion for a received TCF signal.
1. Enter 1 or 2 using the numeric key to change the setting.
Display
1: LONG
2: SHORT
2. Press the start key. The value is set.
3. To return to the screen for selecting an item, press the stop/clear key.

Setting the short protocol transmission

Sets if short protocol transmission is performed.
1. Change the setting using the numeric keys.
Display
1: ON
2: OFF
2. Press the start key. The value is set.
3. To return to the screen for selecting an item, press the stop/clear key.

Setting the reception of a short protocol transmission

Selects whether to receive or ignore transmission using short protocol.
If a short protocol transmission is received when an auto switching device is attached to the machine,
communication problems, including auto switching inability, sometimes occur. Change the setting to ignore
short protocol transmission to prevent such problems.
1. Change the setting using the numeric keys.
Display
1: ON
2: OFF
2. Press the start key. The value is set.
3. To return to the screen for selecting an item, press the stop/clear key.
Display
Sets the criteria for receiving a TCF signal 2.
Sets the short protocol transmission.
Sets the reception of short protocol transmission.
Sets the CNG detection times in the fax/telephone auto select mode.
Turns ECM for abbreviated dialing on/off.
Turns ECM for one-touch dialing on/off.
Description
Checks for 1.0 s.
Checks for 0.8 s.
Description
Short protocol transmission is performed.
Short protocol transmission is not performed.
Description
Receives short protocol transmission.
Ignores short protocol transmission.
Description
Description
3JF
1-3-29