G3 Cable Equalizer; Setting The G3 Transmission Cable Equalizer; Setting The G3 Reception Cable Equalizer - Kyocera Fax System L Service Manual

3JF
Maintenance
item No.
U611

G3 cable equalizer

Description
Sets the G3 cable equalizer.
Start
1. Press the start key. The screen for selecting an item is displayed.
2. Select the item to be set using the up/down cursor keys.
3. Press the start key.
The screen for the selected item appears.
Display
REG. G3 TX EQR
REG. G3 RX EQR

Setting the G3 transmission cable equalizer

Perform the following adjustment to make the equalizer compatible with the line characteristics.
1. Change the setting using the numeric keys.
Display
1: 0
2: 18
3: 36
4: 72
2. Press the start key. The value is set.
3. To return to the screen for selecting an item, press the stop/clear key.

Setting the G3 reception cable equalizer

Perform the following adjustment to make the equalizer compatible with the line characteristics.
1. Change the setting using the numeric keys.
Display
1: 0
2: 18
3: 36
4: 72
2. Press the start key. The value is set.
3. To return to the screen for selecting an item, press the stop/clear key.
Completion
Press the stop/clear key at the screen for selecting an item. The screen for selecting a maintenance item No. is
displayed.
1-3-20
Description
Description
Sets the G3 transmission cable equalizer.
Sets the G3 reception cable equalizer.
Description
0 km
1.8 km
3.6 km
7.2 km
Description
0 km
1.8 km
3.6 km
7.2 km