Initialization Procedure After Installation Of Facsimile System - Kyocera Fax System L Service Manual

3JF

Initialization procedure after installation of facsimile system

1. Insert the machine power plug to the wall outlet and turn the power
switch on.
2. Run maintenance item U601.
3. Enter a destination code using the numeric keys (refer to the
destination code list) and then press the start key.
* Enter a destination code with three digits.
Code
000
009
080
084
088
108
126
136
137
152
156
4. Enter the OEM code (000) and then press the start key.
5. Confirm that the display is changed as shown in the illustration.
* At the position of @, the version number of the software is
displayed.
6. Press the cursor key to change the display to maintenance item
U602.
7. Press the start key and confirm that the display is changed as
shown in the illustration.
* At the position of @, the version number of the software is
displayed.
8. After completing the installation, run a communications test to
confirm that the fax system is working correctly.
1-2-10
Destination Code
Japan 159
Australia 169
Hong Kong 181
Indonesia 242
Israel 243
Malaysia 253
New Zealand
Peru
Philippines
Middle East
Singapore
Destination
South Africa
Thailand
U.S.A.
South America
Saudi Arabia
CTR21 (European nations)
Italy
Germany
Spain
U.K.
Netherlands
Code Destination
253 Sweden
France
Austria
Switzerland
Belgium
Denmark
Finland
Portugal
Ireland
Norway
254 Taiwan
INI. KEEP DATA
COMPLETED XXX 000
INI. KEEP DATA
COMPLETED V@.@@
SELECT THE MAINTENANCE NUMBER.
Initial keep data
Figure 1-2-23
INI. SHIP DATA
COMPLETED XXX 000
INI. SHIP DATA
COMPLETED V@.@@
SELECT THE MAINTENANCE NUMBER.
Initial ship data
Figure 1-2-24
U601
U602