Setting The Continuous Detection Time For Remote Switching; Setting The Initial Condition Of Fax Image Scanning Quality; Setting The System (Operation Unit And Display); Setting The Conditions Under Which An Error Indicator Turns Off - Kyocera Fax System L Service Manual

3JF
Maintenance
item No.
U605

Setting the continuous detection time for remote switching

(cont.) Sets the detection time when continuous detection is selected for remote switching. (This setting item will be
displayed, but the setting made is ineffective.)
1. Change the setting using the numeric keys.
Continuous detection time for remote switching
2. Press the start key. The value is set.
3. To return to the screen for selecting an item, press the stop/clear key.

Setting the initial condition of fax image scanning quality

Set to the resolution that is most frequently used by the user.
1. Change the setting using the numeric keys.
Display
1: S
2: F
3: SF
4: UF
2. Press the start key. The value is set.
3. To return to the screen for selecting an item, press the stop/clear key.
Completion
Press the stop/clear key at the screen for selecting an item. The screen for selecting a maintenance item No. is
displayed.
U606

Setting the system (operation unit and display)

Description
Makes settings for fax transmission regarding the operation unit and display.
Start
1. Press the start key. The screen for selecting an item is displayed.
2. Select the item to be set using the up/down cursor keys.
3. Press the start key.
The screen for the selected item appears.
Display
ALARM LED OFF
DATE PATTERN
RESO. LOCK
DENS. LOCK
REPORT SKIP

Setting the conditions under which an error indicator turns off

1. Enter 1 or 2 using the numeric keys to change the setting.
Display
1: RESET
2: COMM
2. Press the start key. The value is set.
3. To return to the screen for selecting an item, press the stop/clear key.
1-3-10
Description
Description
Standard
Fine
Super fine
Ultra fine
Description
Sets the conditions under which an error indicator turns off.
Sets the date format.
Sets if the image scanning quality in fax mode is initialized.
Sets if the scanning density in fax mode is initialized.
Sets whether to skip unregistered abbreviated numbers
and one-touch key numbers on the list.
Description
An error indicator turns off only when the
reset key is pressed.
An error indicator turns off when any key is
pressed, an original is inserted or the next
transmission is started.
Description
Setting range
0 to 255 (× 5 : ms)