Station Cards - Samsung OfficeServ 7200 General Description Manual

2.3.3 STATION CARDS

8DLI2
This card is an eight circuit digital station interface card that provides 2B+D service when installed in any univer-
sal card slot in all cabinets. Keyset daughter boards will only work when connected to this card.
16DLI2
This card is a sixteen circuit digital station interface card that provides 1B+D service when installed in any univer-
sal card slot in all cabinets. Keyset daughter boards will not work when connected to this card.
8SLI3
This card is a eight circuit analog station interface for industry standard single line telephones or other analog
peripheral devices. The 8SLI does not contain any over-voltage protection and is not qualified as OPX. This card
automatically detects DTMF or dial pulse signals from the SLT ports. Each port on this card has built-in DTMF
receivers (for DTMF tone detections from analog devices) and CID transmitters (sends FSK signals for displaying
CID name and number to analog devices). The 8SLI3 does not need to share these system resources. This will
relieve the congestion of the MFM, RCM2, or CRM system resources. It can be inserted in any universal card slot in
all cabinets. Each port on this card is intended for connection to one telephone. Connecting multiple telephones
to a port may result in incorrect operation or damage to the card. The 8SLI3 supports message waiting lamp func-
tionality for analog stations that have this capability. This card supports Power Fail Transfer feature. (This card
requires software version 4.60 or higher). See the installation manual for details.
16SLI3
This card is a sixteen circuit analog station interface for industry standard single line telephones that require oper-
ation of an industry standard message waiting lamp with a voltage range of 85 ~ 96 VDC. The lamp can flash at a
programmable rate of 100ms to 2000ms ON/OFF times. The 16SLI3 does not contain any over-voltage protection
and is not qualified as OPX. This card provides 16 ports for connecting anlog stations. It can go into any universal
slot of any cabinet. Add as many as needed. This card automatically detects DTMF or dial pulse signals from the
SLT. Each port on this card has built-in DTMF receivers (for DTMF tone detections from analog devices) and CID
transmitters (sends FSK signals for displaying CID name and number to anlog devices). The 16SLI3 does not need
to share these system resources. This will relieve the congestion of the MFM, RCM2, or CRM system resources. It
can be inserted in any universal card slot in all cabinets. Each port on this card is intended for connection to one
telephone. Connecting multiple telephones to a port may result in incorrect operation or damage to the card. The
16SLI3 supports message waiting lamp functionality for analog stations that have this capability. This card sup-
ports the Power Fail Transfer feature. (This card requires software version 4.60 or higher). See installation manual for
details.
8COMBO3
This card has a combination of eight dedicated digital stations ports (1B+D) for Samsung Digital Keysets and
eight dedicated analog station ports for industry standard single line telephones or other analog devices. This
card installs in any universal slot in any cabinet. Each port on this card has built-in DTMF receivers (for DTMF tone
detection from analog devices) and CID transmitters (sends FSK signals for displaying CID name and number to
analog devices). The 8COMBO3 does not need to share these system resources. This will relieve the congestion of
the MFM, RCM2, or CRM system resources. The 8COMBO3 supports message waiting lamp (functionality for ana-
log stations that have this capability. (This card requires software version 4.60 or higher).
2.5