Samsung OfficeServ 7200 General Description Manual page 58

Supports software version 4.60 or higher
Hide thumbs Also See for OfficeServ 7200:
Table of Contents

Advertisement

Intercom Calling/Discrete Dialing Plan: Station to station and station to group calls can be made across
the network link without having to dial an access code for a call within the network. LCR can also be pro-
grammed to route calls across a network link and to access local trunks in another networked system.
Message Key Across the Network: This feature allows station users to set a message waiting indication
to another station in another Node in the network. Upon receiving a busy or no-answer condition, press
the MSG key or dial the feature code. This will light the message waiting light at the called station. To
return the message press the MSG key with the flashing red LED.
Network Page Key: With one or more of these keys users may make page announcements to page zones
in others Nodes in the Network. The network page (NP) key is different than the Page key in a single
node. For example, It is programmed as NPO24 where 02 = Node 2 and 4 = page zone 4 in Node 2.
Network Time Protocol (NTP): Network Time Protocol (NTP) Client is a supported feature of the OfficeServ
7000 system. When this system is connected to the network (WAN), the internal clock of the phone sys-
tem will update and stay current by polling the network of a National Timer Server. Note: This feature
requires software version 4.60 or higher.
Network Trunk Ring Destination: This feature allows lines/trunks from the telephone company connect-
ed to one Node to be programmed to ring at a destination (station or station group) in another Node.
Remote Hold Across the Network: Calls may be placed on hold at stations in another Node. Then page
that Node and announce that there is a call on holding on extension 2xxx. Anybody in this Node may
pick up the call by dialing 12 + 2xxx. This is useful when one Node does not have a dedicated answering
position. The caller is on Hold listening to music rather then listening to ringback tone. Note: Remote
Hold to a virtual extension in another node is not available.
Transfer Recall: Calls transferred across a network link will recall to the transferring station after the orig-
inating system transfer recall timer expires. After recalling, if not answered prior to that systems atten-
dant recall timer expiring, the call will recall to that systems designated operator group. Attendant recalls
will not recall to a 'Centralized Attendant" .
Transfer Retrieve: Calls on Transfer Hold during a screened transfer can be retrieved by pressing the call
button for that call.
Voice Mail Transfer Key: Users may transfer a caller directly to a co-workers voice mail box with out ring-
ing their telephone by pressing the VT key and dialing their extension number. The caller will then hear
that co-workers personal greeting regardless of where they are in the network.
OfficeServ
CONNECT
The OfficeServ
Connect feature allows up to 5 devices to ring simultaneously with a Master Station. When
one device answers the others stop ringing. This allows users to have phones in more than one location (such
as an office phone and a conference room phone) but receive calls from one phone number. When com-
bined with the Mobile Extension (MOBEX) feature the OfficeServ
calls ring at their desk and on their cell phone at the same time by having users dial one common number,
keeping the user from being forced to give out their cell phone number. Calls that are unanswered by either
device will forward to the voicemail box for the Master Station.
Mobex Callback: This feature has been added to save on outbound call charges from a mobile phone.
Now users can simply make an incoming call into the OfficeServ system and get a busy signal followed
by a disconnect signal. After a short time, the system will callback the user's phone and give dial tone
from the system. (This is now an incoming call to the user and not an outbound call). Now the user is able
to make the call through the OfficeServ without incurring the normal charges of an outbound call.
Connect allows users to have business
4.25

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents